Flue Kits

The Attard’s Australian Made Flue Kit

Attards Metal & Heaters manufacture fully certified, Australian made Wood Heater & Pellet Heater flue kits that suit our wide range of heaters. Our flue kits made in our Lismore factory are manufactured from high quality stainless steel & galvanised steel.

The standard Wood Heater flue kit’s active flue pipes and weather cowl are fabricated from 304 grade, 0.55mm thick, 2B finish stainless steel, ensuring trouble free years of service. The protective outer and middle pipes are fabricated from 0.55mm thick galvabond steel sheets. The drop box system includes ceiling ring with ceramic spacers & screws and also an end ring to suit the size of hot pipe or Decromesh used.

The standard Pellet Heater flue kit’s active flue pipes and weather cowl are fabricated from 304 grade, 0.55mm thick, 2B finish stainless steel, ensuring trouble free years of service. The protective outer pipes are fabricated from 0.55mm thick galvabond steel sheets. The drop box system includes ceiling ring with ceramic spacers & screws and also an end ring to suit the size of hot pipe or second skin pipe being used.

It is important to note that the weather cowl supplied is entirely fabricated from stainless steel; this includes the weather cone protecting the active pipe, the outer wind band, the outer cone protecting the inner and outer pipes and all assembly brackets. We do not use any plated steel items in our assembly.


Attards Standard Wood Heater Flue Kit

The standard wood heater flue kit consists of:

  • 5 lengths of Ø152mm (6”) x 915mm long stainless steel flue pipes
  • 2 lengths of Ø 203 (8”) x 915mm long galvanised steel protective pipes
  • 1 length of Ø 255mm (10”) x 915mm long galvanised steel outer pipe
  • 1 length Ø 255mm (10”) drop pipe x 915 long galvanised steel outer pipe (can be colour matched to Decromesh/wood heater, or made in stainless steel)
  • 2 lengths of Decromesh painted Metallic Black or Ironbark (Charcoal)
  • 1 Stainless Steel weather cowl
  • Ceiling and drop pipe end rings with ceramic spacers & screws
  • 2 lengths of 30 x 20 galvanised support angle
6-Inch Decromesh Flue Kit Details
6-Inch Decromesh Flue Kit Details

Attards Standard 80mm Pellet Heater Flue Kit

The standard pellet heater flue kit consists of:

  • 5x 80mm stainless steel flue pipes 915mm long (three of them painted “Metallic Black”)
  • 1x 150mm galvanised steel flue pipes 915mm long
  • 1x 150mm galvanised steel drop box/pipe 915mm long (with one end painted “Metallic Black”)
  • 1x 80mm stainless steel “Tee Piece” with removable end cap (painted “Metallic Black”)
  • 1x Weather cowl (fully stainless steel, Vented, with wind band)
  • 1x Ø350mm Ceiling ring (stainless steel painted “Metallic Black”)
  • 1x End ring (stainless steel painted “Metallic Black”)
  • 2x Bracing angle sections
80mm Pellet Heater Flue Kit Details
80mm Pellet Heater Flue Kit Details

Options & Customisation

As an option we can replace the outer flue pipes, the ones you see outside above your roof, with any standard Colorbond sheet to match in with your roof. We also supply flue pipe offsets, protective shields, and special wind directional weather cowls.

If you are located near the coast, we can also make a fully stainless steel flue kit upon request.

We can custom make just about any shape or size of flue to suit your individual needs.